|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MLX90242 Linear Hall Effect Sensor Features and Benefits * * * * * * * * Quad Switched Hall Plate / Chopper Stabilized Amplifier Ratiometric Output for A/D Interface Low Quiescent Voltage Thermal Drift Small Plastic Packages (TSOT, 4-SIP-VA, TO-92) RoHS compliant TSOT package Applications Linear Position Sensing Rotary Position Sensing Current Sensing Ordering Information Part No. MLX90242LUA-CC03 MLX90242LVA-CC03 MLX90242ESE-BC03 MLX90242ESE-CC03 Sensitivity 40 mV/mT ( 500G) 40 mV/mT ( 500G) 15 mV/mT ( 1300G) 40 mV/mT ( 500G) Voq 2.50 V 2.50 V 2.50 V 2.50 V TC Temp. Range Package Nb pins UA VA TSOT TSOT 3 4 3 3 700 ppm/C -40C to 150C 700 ppm/C -40C to 150C -40C to 85C -40C to 85C 1. Functional Diagram 2. Description The MLX90242 is a CMOS Linear Hall Effect sensor IC. It possesses active error correction circuitry which virtually eliminates the offset errors normally associated with analog Hall Effect devices. The ratiometric output voltage is proportional to the supply voltage. When using the supply voltage as a reference for an A/D converter, fluctuations of +10% in supply voltage will not affect accuracy. For a positive slope, the voltage at the output will increase as a South magnetic field is applied to the branded face of the MLX90242. Conversely, the voltage output will decrease in the presence of a North magnetic field. For a negative slope, the voltage at the output will increase as a North magnetic field is applied to the branded face of the MLX90242. Conversely, the voltage output will decrease in the presence of a South magnetic field. VDD Output Chopper Package TSOT UA VA Pin1 Pin2 Pin 3 Pin4 VDD VDD VDD Out VSS n/c VSS Out VSS Out Slope Positive Negative Positive 3901090242 Rev. 025 Page 1 of 10 Data Sheet Jan/06 MLX90242 Linear Hall Effect Sensor TABLE OF CONTENTS FEATURES AND BENEFITS................................................................................................................... 1 APPLICATIONS ...................................................................................................................................... 1 ORDERING INFORMATION.................................................................................................................... 1 1. 2. 3. 4. 5. 6. 7. 8. FUNCTIONAL DIAGRAM ..............................................................................................................1-1 DESCRIPTION ..............................................................................................................................2-1 GLOSSARY OF TERMS................................................................................................................... 3 ABSOLUTE MAXIMUM RATINGS.................................................................................................... 3 MLX90242 ELECTRICAL SPECIFICATIONS ................................................................................... 4 MLX90242 MAGNETIC SPECIFICATIONS....................................................................................... 4 APPLICATIONS INFORMATION...................................................................................................... 5 INSTALLATION COMMENTS........................................................................................................... 5 9. STANDARD INFORMATION REGARDING MANUFACTURABILITY OF MELEXIS PRODUCTS WITH DIFFERENT SOLDERING PROCESSES....................................................................................... 6 10. ESD PRECAUTIONS........................................................................................................................ 6 11. PACKAGE INFORMATION .............................................................................................................. 7 11.1. 11.2. 11.3. UA PACKAGE....................................................................................................................................... 7 TSOT PACKAGE (ROHS COMPLIANT) ................................................................................................... 8 VA PACKAGE....................................................................................................................................... 9 12. DISCLAIMER.................................................................................................................................. 10 3901090242 Rev. 025 Page 2 of 10 Data Sheet Jan/06 MLX90242 Linear Hall Effect Sensor 3. Glossary of Terms - Gauss, Tesla: Two units to quantify a magnetic flux density. Conversion: 1 mT = 10 Gauss - Voq: Quiescent output voltage. Output voltage for B = 0. 4. Absolute Maximum Ratings Supply Voltage (Over Voltage), VDD Output Current Short to Vdd Output Current Short to Vss Output Pin Short to Vss Pin Output Over Voltage Operating Temperature Range, TA Storage Temperature Range, TS Maximun Junction Temp, TJ Magnetic Flux Density 7.0 V 5 mA 0.5 mA Infinite 8V -40C to 150C -55C to 150C 170C Infinite Exceeding the absolute maximum ratings may cause permanent damage. Exposure to absolutemaximum-rated conditions for extended periods may affect device reliability. 3901090242 Rev. 025 Page 3 of 10 Data Sheet Jan/06 MLX90242 Linear Hall Effect Sensor 5. MLX90242 Electrical Specifications DC Operating Parameters. L: T A = -40 to 150C, E: TA = -40 to 85C VDD = 5.0V (Unless otherwise specified) Parameter Supply Voltage Supply Current Output Current Quiescent Output Voltage Output Voltage Output Voltage Response Time Noise (RMS) Output Resistance Linearity Error Symbol Test Conditions VDD IDD IOUT VOQ VOH VOL tr Operating B = 0, VDD = 5V, IOUT = 0 Min 4.5 1.8 -1.0 2.4 4.75 Typ 5.0 2.5 2.5 Max 5.5 4.5 0.1 2.6 Units V mA mA V V VDD = 5V Pull-up = 5 k , Pull-down = 50 k B = 0, TA = 25C VDD = 5V, IOUT = -1.0 mA VDD = 5V, IOUT = 0.1 mA 0.25 400 5 800 10 V S mV Vdd=5V,Vout from Voq to VOH/VOL without load ROUT Le 20 0.5 %Vdd 6. MLX90242 Magnetic Specifications L: T A = -40 to 150C, E: T A = -40 to 85C VDD = 5.0V (Unless otherwise specified) Parameter Thermal Voq Drift (1) (mV) Sensitivity, TA = 25 C (mV/mT) TC of Sensitivity (ppm/C) (1) B = 0, TA = -40 to 150C (2) For TSOT package, TC of Sensitivity and Thermal Voq Drift are not fully tested and therefore cannot be specified. Characterization and statistic data can be provided by Melexis upon request. Symbol MLX90242LUA-CC03 MLX90242LVA-CC03 MLX90242ESE-BC03 MLX90242ESE-CC03 VOQ S TCS Min -25 33.2 430 Typ 39.0 680 Max 25 44.9 930 Min -25 35.3 430 Typ 41.5 680 Max 25 47.7 930 Min 11.5 Typ Max +/- 25 (2) 15 680 (2) 17.3 Min 33.2 Typ Max +/- 25 (2) 39.0 680 (2) 44.9 3901090242 Rev. 025 Page 4 of 10 Data Sheet Jan/06 MLX90242 Linear Hall Effect Sensor 7. Applications Information C1 and C2 values can be trimmed to satisfied EMC requirements according to the environment (PCB, connectors,...). The output rise time is affected for large capacitor C2, depending of the couple R1;C2. Recommended Wiring VDD 3 MLX 90242 C1 = 10nF 1 2 R1 = 10 k C2 = 2.5nF V OUT 8. Installation Comments 1.) Avoid mechanical stress on leads or package. Stress may cause Voq shift. A.) Avoid bending leads at the package interface. B.) Support the leads by clamping, when bending. C.) Avoid gluing device to another material. This may cause temperature-related stress. 2.) CMOS products are static sensitive devices, please observe ESD precautions. 3.) Observe temperature limits during soldering 3901090242 Rev. 025 Page 5 of 10 Data Sheet Jan/06 MLX90242 Linear Hall Effect Sensor 9. Standard information regarding manufacturability of Melexis products with different soldering processes Our products are classified and qualified regarding soldering technology, solderability and moisture sensitivity level according to following test methods: Reflow Soldering SMD's (Surface Mount Devices) * * IPC/JEDEC J-STD-020 Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices (classification reflow profiles according to table 5-2) EIA/JEDEC JESD22-A113 Preconditioning of Nonhermetic Surface Mount Devices Prior to Reliability Testing (reflow profiles according to table 2) Wave Soldering SMD's (Surface Mount Devices) and THD's (Through Hole Devices) * * EN60749-20 Resistance of plastic- encapsulated SMD's to combined effect of moisture and soldering heat EIA/JEDEC JESD22-B106 and EN60749-15 Resistance to soldering temperature for through-hole mounted devices Iron Soldering THD's (Through Hole Devices) * EN60749-15 Resistance to soldering temperature for through-hole mounted devices Solderability SMD's (Surface Mount Devices) and THD's (Through Hole Devices) * EIA/JEDEC JESD22-B102 and EN60749-21 Solderability For all soldering technologies deviating from above mentioned standard conditions (regarding peak temperature, temperature gradient, temperature profile etc) additional classification and qualification tests have to be agreed upon with Melexis. The application of Wave Soldering for SMD's is allowed only after consulting Melexis regarding assurance of adhesive strength between device and board. Melexis is contributing to global environmental conservation by promoting lead free solutions. For more information on qualifications of RoHS compliant products (RoHS = European directive on the Restriction Of the use of certain Hazardous Substances) please visit the quality page on our website: http://www.melexis.com/quality.asp 10. ESD Precautions Electronic semiconductor products are sensitive to Electro Static Discharge (ESD). Always observe Electro Static Discharge control procedures whenever handling semiconductor products. 3901090242 Rev. 025 Page 6 of 10 Data Sheet Jan/06 MLX90242 Linear Hall Effect Sensor 11. Package Information 11.1. UA Package 1.60 1.40 45o Typical UA Package Dimensions UA Hall Plate / Chip Location 1.95 +/- 0.15 0.84 0.63 4.30 3.90 Typ 5 o 2.64 2.34 Max 5 o Hall Plate dimension: 0.150x0.150 0.45 0.41 42GA 2053 0.48 0.43 0.7 Max 0.20 0.00 * 3.20 2.80 Max 5 o 1.52+/-0.15 Marked Surface 1.75 1.55 Min. 9.0 0.38 Typical (see note 3) All Dimensions in millimeters 1 0.41 0.35 2 3 0.41 0.35 Front side marking 1.30 1.24 Part Number MLX90242 (2 digits) 2.57 2.51 PINOUT: Pin 1 Pin 2 Pin 3 VDD GND (Vss) Output NOTES: 1.) Controlling dimension: mm 2.) Leads must be free of flash and plating voids 3.) Leads must not arc toward the rear of package 4.) Package dimensions exclude molding flash 5.) Tolerance is 0.254mm unless otherwise specified Die Version (2 digits) 42 Y WW GA 3 Last Lot Number Digit (1 digit) Week Date Code (2 digits) Year Date Code (1 digit) 3901090242 Rev. 025 Page 7 of 10 Data Sheet Jan/06 MLX90242 Linear Hall Effect Sensor 11.2. TSOT Package (RoHS compliant) 2.75 BSC 1.60 BSC see note 2 1.10 MAX 0.88+0.02 - 0.03 2 SEATING PLANE 0.075 -0.050 +0.025 Hall plate location 1.4170.15 0.8890.15 0.95 BSC 0.30 0.45 2.90 BSC see note 3 242 1.90 BSC 3 0.2750.06 1 0.50 BSC TOP VIEW END VIEW TOP VIEW 12 REF. TYP. 0.10 R. MIN. 0.10 R. MIN. 0.20 4+/-4 0.40 +/-0.10 see note 5 SEATING PLANE SIDE VIEW WITH PLATING BASE METAL ~ B' B 0.35 +0.05 - 0.10 0.30 0.45 0.127 -0.007 +0.023 0.575 REF. END VIEW Notes: 1. All dimensions are in millimeters SECTION B-B' see note 6 2. Outermost plastic extreme width does not include mold flash or protrusions. Mold flash and protrusions shall not exceed 0.15mm per side. 3. Outermost plastic extreme length does not include mold flash or protrusions. Mold flash and protrusions shall not exceed 0.25mm per side. 4. The lead width dimension does not include dambar protrusion. Allowable dambar protrusion shall be 0.07mm total in excess of the lead width dimension at maximum material condition. 5. Dimension is the length of terminal for soldering to a substrate. 6. Dimension on SECTION B-B' are apply to the flat section of the lead between 0.08mm and 0.15mm from the lead tip. 7. Formed lead shall be planar with respect to one another with 0.076mm at seating plane. Top Side Marking: 242: Part Number MLX90242 Bottom Side Marking: XYWW : Last lot number digit (X) - Year (Y) - Week (WW) 3901090242 Rev. 025 Page 8 of 10 0.15 0.20 Data Sheet Jan/06 MLX90242 Linear Hall Effect Sensor 11.3. VA Package 5.33 5.43 5.08 5.24 J 1.22 1.32 3.76 3.86 4.50 4.10 45o X 1mm A B C Hall Plate 0.15 x 0.15 VA Package Dimensions VA Hall Plate / Chip Location 1.88 +/- 0.15 2.40 +/- 0.15 MLX 90242 0.387 0.289 242GA * XXXXXXX F G H 1 2 3 4 1.0 MAX 0.22 REF 5o (2x) 0.387 0.289 5o (2x) 3.46 3.79 3.30 3.63 D Marked Surface Reference (0,0) All Dimensions in millimeters VA A B C 15.50 14.50 1.20 1.10 0.66 0.61 0.29 0.24 45o 0.31 0.18 0.60 0.40 0.35 0.25 0.15 0.0 45o E Notes: 1. Pinout: D E 0.45 0.35 F G H J Pin 1 VDD Pin 2 n/c Pin 3 GND Pin 4 Output 2. Controlling dimension: mm . 3. Leads must be free of flash and plating voids. 4. Leads must not arc toward the rear of package. 5. Package dimensions exclude molding flash. 6. Tolerance: +/- 0.254 mm unless otherwise specified. 9. *Marking: Line 1: 1st three digits (242) = Part Number 4th and 5th digits (GA) = Revision Number Line 2: 7 Digits Back Side Marking YYWW =Lot Number =Lot Number =DateCode 3901090242 Rev. 025 Page 9 of 10 Data Sheet Jan/06 MLX90242 Linear Hall Effect Sensor 12. Disclaimer Devices sold by Melexis are covered by the warranty and patent indemnification provisions appearing in its Term of Sale. Melexis makes no warranty, express, statutory, implied, or by description regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. Melexis reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with Melexis for current information. This product is intended for use in normal commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or life-sustaining equipment are specifically not recommended without additional processing by Melexis for each application. The information furnished by Melexis is believed to be correct and accurate. However, Melexis shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interrupt of business or indirect, special incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of Melexis' rendering of technical or other services. (c) 2005 Melexis NV. All rights reserved. For the latest version of this document, go to our website at www.melexis.com Or for additional information contact Melexis Direct: Europe, Africa, Asia: Phone: +32 1367 0495 E-mail: sales_europe@melexis.com America: Phone: +1 603 223 2362 E-mail: sales_usa@melexis.com ISO/TS 16949 and ISO14001 Certified 3901090242 Rev. 025 Page 10 of 10 Data Sheet Jan/06 |
Price & Availability of MLX90242 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |